Simulates 0.4mm PE and 0.5mm PE as specified in ETSI TS 101 388
Bandwidth DC to 36 MHz
Solution for ADSL, ADSL2, ADSL2+, VDSL2 (including Profile 35b)
Sufficient Bandwidth for VDSL2 Profile 35b
0.4 mm PE: Loop lengths programmable from 0 to 1,575 m in 25-m increments
0.5 mm PE: Loop lengths programmable from 0 to 1,575 m in 25-m increments
Plugs into our Model 458-CC-16 (16-slot) or 458-3SLB (3-Slot) chassis
Loop Lengths can be controlled manually via front panel
of chassis, or remotely via RS-232, Ethernet or IEEE-488 (GPIB)
Control using 458 Universal GUI software
Noise Floor less than –150 dBm/Hz

Product Specifications


Simulation	Accurately simulates attenuation and impedance 0.4 mm PE and 0.5 mm PE as specified in ETSI TS 101 388
Bandwidth	DC to 36 MHz.
Attenuation Accuracy(when source and load impedances are 100 ohms)	0.4 mm PE: Loop lengths programmable from 0 to 1,575 m in 25-m increments 0.5 mm PE: Loop lengths programmable from 0 to 1,575 m in 25-m increments
Maximum Attenuation	> 90 dB
Impedance Accuracy	Typically +/- 10% 25 kHz to 36 MHz
Maximum Voltage Tip ?Ring	200 V
Maximum Current	130 mA
Connectors	4 RJ-45’s on front including 2 for noise injection 4 RJ-45’s on back including 2 for noise injection

Specifications are subject to change without notice. Made in USA