Model 458-SM-2-16 Transparent Switching Module

Related Technologies: local loop simulator/ wireline simulator / switching module/switching matrix/ ADSL / ADSL2 / ADSL2+ / ADSL2++ / VDSL / VDSL2/ multiplex/ demultiplexer/automated testing


Shown in 458-3SLB chassis (sold separately)

MORE INFO

  • High Performance transparent solution designed to automate testing of ADSL, ADSL2, ADSL2+, & VDSL2 chip/modem/DSLAMs
     

  • Bidirectional multiplexing and demultiplexing

 

 

  • Low Crosstalk/Low Insertion Loss
     

  • Can be controlled remotely via RS-232, Ethernet or IEEE-488 (GPIB)
     

  • Plugs into our 458 Series (16-Slot) or 458-3SLB (3-Slot) chassis
     

  • One-Year Warranty/Calibration. See Customer Care Program for details.

The Model 458-SM-2-16 Transparent Switching Module is a transparent, electrically neutral, multiplexing/demultiplexing device that allows up to sixteen incoming lines to share (be directed to) up to two independent local loop simulator output channels, or two incoming lines to share (be directed to) up to sixteen independent local loop simulator output channels. The user may select one or two of the inputs (or outputs) out of sixteen, with the unselected paths being terminated with 100 ohms.

This powerful local loop simulator is plugged into our Model 458-3SLB (3-Slot) or 458-CC-16/458-CM (16 Slot) rack-mounted chassis where settings are controlled by RS-232, Ethernet or IEEE-488(GPIB). The modular design of Telebyte’s products allows the 458-SM-2-16 to be combined with our other local loop simulator products for a wide variety of test configurations.

Diagram of Allowable Multiplexing/Demultiplexing Combinations:

Product Specifications       

Signal Switching Capability

Multiplexing:

·         16 balanced input lines to 1 of 2 balanced output lines (16x1); or

·         16 balanced input lines to both balanced output lines (8x2)

 

Demultiplexing:

·         1 balanced input line to 16 balanced output lines (1x16); or

·         2 balanced input lines to 8 balanced output lines each (2x8)

Insertion Loss

Less than 0.5 dB from DC to 30 MHz

Less than 1 dB up to 60 MHz

Noise Floor

Less than -140 dBm/Hz from DC to 30MHz

Tip and Ring Balance

Better than 53 dB up to 12 MHz

Degrading by 20 dB per decade from 12 MHz to 30 MHz

Return Loss

26 dB minimum up to 30 MHz (100-ohm reference)

Crosstalk Between Lines

Maximum -90 dB up to a minimum frequency of 30 MHz

Temperature

Operating: 0°C to 50°C (32°F to 122°F)

Storage  -20°C to 70 °C (-18°F to 158°F)

Operating Relative Humidity

0% to 95% relative humidity (non-condensing)

Dimensions

Overall: 12.21”H x 0.86”W x 20.85”D

(310mm H x 22mm W x 529mm D)

Connectors

16 RJ-45’s on front, 2 RJ-45’s on back

Relay Cycles of Operation

5,000,000 cycles

Toxic Materials

Complies with RoHS Directive

   View More Plug-In Modules

 
 

home | sales/support | about telebyte

Telebyte is a leading designer and supplier of local loop simulators (wireline simulators) and interference simulators (noise generators) for testing xDSL equipment used for ADSL2+, VDSL, VDSL2, TR-114, TR-100, TR-127 testing and more. Site design by Telebyte, Inc. ©2010 Telebyte, Inc. All rights reserved.

The enhanced version of this site requires the Flash Plug-In and Internet Explorer. Viewing of PDFs requires Adobe Reader. To switch to the enhanced version, click below.